注:浙江省科技计划资助项目(NO. 2017C33224)
作者:沈建明1,胡元云2,徐鑫2,雷英栋1
单位:1. 嘉兴职业技术学院,嘉兴 314036;
2. 嘉兴佳利电子有限公司,嘉兴 314003
中图分类号:TP212
文献标识码:A
文章编号:1006-883X(2019)07-0012-06
收稿日期:2019-06-24
摘要:随着汽车工业的迅速发展,出于环保考虑,传统的化油器式汽车逐渐被电控喷油车辆所代替。而氧传感器是电控喷油车辆电子控制系统的重要器件,让发动机得到最佳浓度的混合气,实现降低有害气体的排放和节油的目的。本文介绍了一种用于电控喷油车辆电子控制系统的氧传感器--汽车四线片式氧传感器,主要从制作流程、工作原理、测试方法三个方面来展开叙述,为诊断和应用此传感器提供了依据。
关键词:汽车四线;片式;氧传感器
Discussion on Four-wire and Chip of Oxygen Sensor for Automobile
SHEN Jian-ming1, HU Yuan-yun2, XU Xin2, LEI Ying-dong1
1. Jiaxing Vocational Technical College, Jiaxing 314036, China; 2. Jiaxing GLEAD Electronics Co., Ltd., Jiaxing 314003, China
Abstract: With the rapid development of automobile industry, the traditional carburettor vehicle is bound to be replaced by the electronic fuel injection vehicle for environment protection reasons. The oxygen sensor is an important device in the electronic control system of the electronic fuel injection vehicle, which makes the engine get the mixturegas with best concentration and gets the purposes of reducing the emission of harmful gases and saving fuel. An advanced oxygen sensor used in the electronic control system of the electronic fuel injection vehicle, four-wire and chip of oxygen sensor for automobile, is introduced from three aspects of fabrication flow, working principle and test method, which provides the basis for the diagnosis and application of this kind of sensor.
Key words: four-wire of automobile; chip; oxygen sensor
备注:2019年 第25卷 第07期